-
Out of stock
Anvil Apex Vice is a quality 'Made in America' one that can be used with hooks from a size 6/0 to a 32. It features a simple cam lever operation and comes with a Pedestal base. -
Out of stock
Anvil Apex Vice "Made in America" is a superb high quality full rotary vice that will handle hooks from 6/0 down to 28 and it comes with a G Glamp and a Pedestal Base. Hard to beat for value. -
Out of stock
Very sharp scissors, great for fine detail work. -
Out of stock
Off-set, long reach scissors. -
Out of stock
The same great scissors as the straight Anvil Ultimate scissors but slightly curved., great for deer hair. -
If there's one pair of scissors that allow you to do everything that you need, it's these ones! -
Out of stock
The Anvil Taperizer features multi-tooth blades with micro serration specially created to thin and blend natural or synthetic fibres easily. -
A cleverly designed whip finisher that will greatly improve the way you finish off your flies.Features
- Finisher arms made of electro-polished stainless steel produce smooth thread operation
- Body parts are machined from quality brass stock, with pearl chrome plating
- Knurled non-slip grip and smooth rotary mechanism
- Neodymium magnet installed at the grip end for picking up hooks
-
The biggest brother in our Stacker lineup. Ideal for evening up the material tips for big streamers.Features
- Sleek 3-piece design that stems from C&F’s background in leading product design
- The bottom is made of elastomer rubber that won’t damage the table surface
- To accommodate large amounts of hair, remove the inner tube
- Body/Tube: brass
- Finish: pearl chromium
- Comes with a small comb to remove underfur of animal hair
-
Out of stock
A multi-purpose dubbing needle that comes with an integrated brush and half-hitcher.Features
Needle: A sharp needle for cleaning hook eyes, boringholes on a foam piece, or delicate dividing work.The angled section holds head cement for easyapplication. Brush: The brush in the middle is made of fine stainlesswire for picking out dubbed bodies. Half hitcher: A hitcher at the end of the handle comes inhandy for temporarily securing thread atthe eye. -
A clever tool that makes finishing up flies lightning quick.Features
- Clever 3-tip design for any hook sizes
- 3 sizes of hitcher tips (S/M/L) on one compact body
- Knurling on the machined handle provides perfect grip
- Finished in durable pearl chromium
- Superfine S-tip is for hooks down to #32
- M-tip screws on over the S-tip
- L-tip is 40 mm deep for easy half hitching on the shank
-
A handy dubbing twister that is perfectly suited for nymphs and streamers.Features
- Suitable for all sorts of dubbed bodies
- Use hackle pliers to wind the finished dubbing rope
- Made of brass, coated with durable pearl chromium
- Knurled handle provides perfect grip
-
Out of stock
See things from the perspective of the fish A useful to check your fly’s impression on the water from beneath.Features
- Simulated fish window based on the theory of refraction angle of water and air
- Useful to check your fly’s floatation from beneath
-
Out of stock
An innovative stand for organized tying or for displaying finished flies.Features
- Three Micro Slit Foam Discs of different sizes and pitches are incorporated
- Capacity: 48
-
Tired of waiting for epoxy and other glues to fully dry and settle? The C&F Fly Wheel takes care of that…Features
- Designed for curing flies that have received application of glues such as epoxy, Softex and E-Z Shape Sparkle Body.
-
Out of stock
The hackle pliers model CFT-120 works perfectly for normal hackles as well for parachutes. The pliers have a pair of superb grips on the clip and, plenty of purchase area under the flared points too. The flexible rubber neck between the clip and the finger-loop is absolutely new to me and although you think at first it will not last for long, you will change your mind quickly when using it. It’s very solid and seems very good quality rubber indeed. The elastic motion surely will help prevent the hackle quills from snapping while winding. It’s a brilliant little tool.Features
-Plier head has a slight flare at the nose to minimize the risk of cutting materials- Shock-absorbing elastomer joint
- Brass stabilizer/finger hole with optimized weight
- Grip: elastomer rubber
- Head: stainless steel
-
Magnetic Pallet for Hooks.Features
- For slim and effective hook stock organization
- 12/18/6 magnetic compartments keep hooks securely
- Use CFA-11 (3-in-1 Nail Knot Pipe) that has a magnetic tip for easy pickup. CFA-11 is sold separately
-
Designed to wind flat materials such as goose/turkey biot smoothly with the head twisted 9 degrees from our standard Hackle Pliers.Features
- The head has a sight flare at the nose to minimize the risk of cutting materials
- The gripping surface inside is sandblasted to prevent slippage
- The shock-absorbing elastomer joint and rubber o-ring gives you a good touch and tension
-
Out of stock
The hackle pliers model CFT-120 Midge works perfectly for normal hackles as well for parachutes. The pliers have a pair of superb grips on the clip and, plenty of purchase area under the flared points too. The flexible rubber neck between the clip and the finger-loop is absolutely new to me and although you think at first it will not last for long, you will change your mind quickly when using it. It’s very solid and seems very good quality rubber indeed. The elastic motion surely will help prevent the hackle quills from snapping while winding. It’s a brilliant little tool.Features
- Plier head has a slight flare at the nose to minimize the risk of cutting materials
- Shock-absorbing elastomer joint
- Brass stabilizer/finger hole with optimized weight
- Grip: elastomer rubber
- Head: stainless steel
-
A swiveling hackle pliers that shares the same head as CFT-120Midge. -
Out of stock
A swiveling hackle pliers that shares the same head as CFT-120. -
An extremely versatile tool for twisting dubbing in loops.
Features
- Pro quality twister employing a large ball bearing to create dubbing loops
- Spin rotary head with your thumb
- Made of brass, coated with durable pearl chromium
- Knurled handle provides perfect grip
-
Out of stock
This comb is perfect for brushing wooly fibres/underfur out of wing materials. Also, a great tool for untangling long dubbing fibres.Features
- Special comb teeth with optimal pitch remove underfur easily
- Stainless steel never develops static electricity
-
Out of stock
Top-of-the-line bobbin holder loaded with great features that will help you improve as a fly tyer.Features
- Optimized bobbin weight (17g) helps keep tension on material during tying
- Teflon-coated bobbin arms for smooth spool revolution
- Clever Micro Slit Foam design in bobbin nose to retain constant thread tension
- Bobbin tube made of zirconium ceramic to reduce thread breakage
- Comes with a bobbin threader
-
Out of stock
A weight-type tool to create a dubbing loop. Particularly good for spinning dubbing in wires. -
For precision work at the fly tying bench - a supreme quality pair of scissors that will enable you to work in detail.Features
• High precisious blades provide a perfect cut • The grip has been ergonomically designed for comfort and controlTech
Weight: 17g -
For bulky materials and cutting deer hair poppers, these scissors will get the job done.Features
• A pair of speciality scissors designed for delicate tying work • The cold-forged blades fit perfectly for clean cut and wear long • Ideal for larger trout flies and streamers • Thanks to the special finish on the contact surfaces, sharp edges and smooth operation result. • Blades made of cutlery stainless steel (VG-8)Tech
Weight: 25g -
For precision work at the fly tying bench - a supreme quality pair of scissors that will enable you to work in detail.Features
• High precisious blades provide a perfect cut • The grip has been ergonomically designed for comfort and controlTech
Weight: 17g -
Out of stock
Take your fly tying to the next level with the complete out of the box solution for fly testing and demonstration. The Fly Tester creates a steady circular flow of water with adjustable flow control, allowing you swim up to 3 flies in 2 directions at once – from streamer flies, to top water flies, to nymphs and emergers.
Design Better Flies
- Observe the swimming action of your flies immediately after tying
- Improve your fly designs and have confidence they will perform as intended when fished
- Share your fly patterns swimming on video with the fly tying community online
Whats included:
- Fly Tester protective carrying case
- High-quality lightweight acrylic test tank with innovative bidirectional flow design
- Removable streamer fly testing tube
- Tippet guide, clamps, and fly placement wand
- Powerful water pump with adjustable flow control
- Operating instructions
- 1-year limited warranty
Specifications
- Weight: 3.5 lbs. (1.59 kg.)
- Dimensions: Height 5” (12 cm.) x Width 2.5” (6.5 cm.) x Length 18” (45 cm.)
- Volume: 1 gal. (3.7 L.)
-
The meanest brush we ever tried. The toughest 1.5 cm velcro on a 15 cm stainless steel handle with an ergonomically friendly grip makes this brush super effective. Comb hair, brush out dubbing or pick single strands. For us this tool is an absolute must for every fly we tie. A copy of Mikael’s old “mustard spoon brush” which he created hundreds of thousands of salmon flies with. -
A classic bobbin design with a ceramic pipe that allows use of the thinnest threads. The neat 10 cm design lets the hand surround the bobbin with total control of thread pressure. Polished steel ball sides and flat thumb grip makes this bobbin very easy to use. -
The FITS Dubbing Needle is a 13 cm long sharp hardened stainless steel needle, long enough to reach down in most varnish or glue bottles. It’s flexible and strong with an ergonomically friendly handle and will easily pick any fiber. Not rocket science, but a handy tool that all fly tiers will have good use of. -
We love this design. Once you’ve started to tie with a crooked scissor you will never want to go back to the classic design. The angle allows a straighter wrist and lower elbow – just ergonomically superior to a straight pair of blades. This crooked scissor is 10 cm in size with a 2,5 cm long razor sharp cutting edge in super high quality carbide technique. This is Mikael’s absolute favourite scissors. -
Our unique hackle plier with its spring loaded hard gripping point is a high quality 13 cm tool in high carbon steel. The swivel handle and the rubber part make it possible to wind even the weakest hackle fibers without braking. The high dead weight makes it possible to let go without feathers unwinding. -
A new handy tool for measuring and cutting your FITS Tubing. The carbon steel tool cuts all four diameters of FITS Tubing with razor sharp accuracy. The tool comes with a non-slip rubber bottom, spring loaded razor cutter and steel bottom measuring plate. A fantastic little tool that makes all tubing same length and all cuts perfect without pressing tubing flat. -
Scissors are the most important fly tying tool for sure. Our stainless steel scissors come in two designs. This straight classic scissor is 10.5 cm in size with a 2.5 cm long razor-sharp cutting edge in super high-quality carbide technique. We have tested our scissors two years, tying thousands of flies, cutting everything and they are still cutting with perfection. -
Its no secret, these scissors are razor sharp, with one serrated blade and one straight. The tension can easily be adjusted to your preference by turning the adjustment know. -
The scissor that does it all. What ever you are tying, this scissor will be up to the job while being comfortable to use. -
Every tying desk needs a bobbin holder, so why wouldn't you chose our fantastic Funky Bobbin Holder. The green colour makes it easy to find amongst the mess of a fly tying desk. These have been designed to be comfortable in the hand and easy to use whether you are tying large or small patterns allowing you to keep gentle tension while tying flies. -
The tool you didn't think you needed but can't be without. A great addition to the tying bench for all sorts of little jobs. -
Wether you are spicing up the body of your dry flies or brushing out the bodies on your temple dogs, this is the dubbing brush for you. The stiff, strong bristles will brush out any fibres to improve the overall look of your flies. -
East-to-use whip finisher. -
Funky Fly-tying Vice, A pedestal based vice in Funky Fly-tying Colours, this 360 degree rotational vice allows for easy inspection and trimming, with a thumb screw the vice can be locked. The head angle can be tilted to suit with a material spring clip to hold longer materials whilst tying. High carbon jaws will take a wide variety of hook sizes which are held in place with a simple one operation cam lever.- 360 degree rotation
- Pedestal base
- Adjustable tilting head
- Cam lever operation
- Height 25cm
- In Funky fly tying colours
-
Stop the hassle of winding hackles and do it with ease thanks to these easy to use and versatile hackle pliers. -
The ultimate Fly Tying tool kit with everything you need to create the perfect fly. Each of our tools have been designed to make it as easy as possible to tie a fly with precision and accuracy. Each kit contains the following tools:- Funky Bobbin Holder
- Funky Whip Finisher
- Funky Hackle Pliers
- Funky All Purpose 4" Scissors
- Funky Bodkin
- Funky Vice Pawn
-
Finish your flies in style with our own whip finisher tool. The base of the tool is designed so that you can cut the thread of neatly and quickly with the same tool. -
The GULFF HERO UV torch is a stylish, highly efficient and innovative solution for curing almost all UV adhesives in flytying. It is especially useful for a user that takes photos of the flies for social media. As a whole, Hero represents the very best in its field. Hero is equipped with a high quality 5W LED chip and has a wavelength of 365nm in line with other GULFF torches, which has been found to be optimal for UV adhesives. The torch has a special filter that pulls out all the fluorescent material from the target surface but does not illuminate the rest of the environment. This, for example, makes taking photos easier and takes on a completely new meaning - gorgeous fluorescent flies against a dark background. In addition, the blinding effect is minimal. Undoubtedly, Hero is a great product in terms of value for money when it comes to fulfilling even high ambitions for a UV torch. HERO UV Torch is equipped with: USB charging directly to the housing | 5W/365nm torch with filter | 18650 rechargeable battery | USB cable | 1-year warranty. The warranty covers the torch housing and the LED, not the battery or the cable -
Out of stock
Includes: -UV Flashlight - Recharchable Battery - USB Charger Features:- Flat lens due to less loss of light
- No zoom due to less loss of light
- A high quality LED chip
- 365 wavelength for most resins
- Customised light control mirror
- Rechargeable batteries
-
Out of stock
To keep tying benches clean and tidy. Materials look so great hanging on the wall in a shop, but most fly tying benches look like a bomb just went off. The Bench Rings solve that problem. The stainless steel rings allow tyers to organize materials, hooks and beads by style/size/type/color using the same bags they came in.Features
- Iconic Loon Yellow powder coated handle
- Three sizes included (30cm, 40cm & 50cm)
- Organizes materials, hooks, etc in poly bags.
- Secure threaded closure
-
What you need plus what you want. The Core Fly Tying Tool Kit and the Accessory Fly Tying Tool Kit put together for anyone who wants to take their bench from zero to hero. -
The tool kit around which benches are built. Packaged in a heavy duty travel case and featuring the Ergo All Purpose Scissors, Ergo All Purpose Bobbin, Ergo Bodkin, Ergo Whip Finisher, and Ergo Hackle Plier this is an excellent choice as a gift for the first-time tyer, or the long-time tyer who wants to trick out his or her bench with something new. -
An oversized tweezer that does everyting from picking up hooks and beads, retaining materials for even the largest dubbing loops/composite loops, and holding materials for dubbing brushesFeatures
- Smooth tips
- Picks up beads and hooks of almost all sizes
- Z-shape holds materials while resting
- 7.25’’ long
-
These precision scissors now have a new ergonomic design and stainless steel blades. An excellent choice for quality and comfort.Features
- 4’’ scissors
- Hand-honed in the USA
- Excellent all-around scissors
- Powder coated grip
- Enlarged ergonomic finger/thumb holes.
-
Out of stock
These precision scissors now have a new ergonomic design and stainless steel blades. An excellent choice for quality and comfort.Features
- 3.5’’ scissors
- Hand-honed in the USA
- Blade shape allows for maximum precision
- Powder coated grip
- Wire cutter
- Enlarged ergonomic finger/thumb holes.
-
Out of stock
An ergonomic and high-performing update to the indispensable tying tool. The powder coated ergonomic handle rests perfectly between the thumb and fingers, while the spring steel spool holder allows for easy adjustment in tension by changing the pressure applied by grip. The tube is designed with versatility in mind: the high gauge works well when tying small flies, and the tube is long enough to tackle large patterns as well.Features
- Ergonomic thumb/finger grip system on barrel
- Japanese steel spool holder
- Custom tube
- Allows for easy adjustment in tension
- Powder coated grip
-
Out of stock
An extra-long bobbin threader that is compatible with even the largest bobbins. The powder coated body is bright Loon yellow, making it easy to find on a bench.Features
- Ergonomic shape
- Powder coated handle
- Compatible with large bobbins
-
Out of stock
An indispensable bodkin gets an overdue ergonomic facelift. The strong needle is made from spring steel for strength and longevity, and is held by a powder coated ergonomic handle.Features
- Ergonomic shape
- Japanese spring steel needle
- Powder coated handle
-
For combing out fly tying materials such as natural and synthetic fur.Features
- Ergonomic shape Powder coated handle
- Stainless steel shaft and teeth
- 2,5cm teeth
-
The only dubbing brush tool that you’ll need. The ergonomic powder coated handle feels great on the hands, while the nylon bristles and stainless steel helix spine are tough enough to tackle any material in need of a good brushing.Features
- Ergonomic shape
- Stainless steel helix spine for strength and longevity
- Powder coated handle
- Nylon bristles
-
The indisdepsible hackle plier receives a makeover.Features
- The smooth jaws are sized with versatility in mind, and the round shape allows for smooth palmering
- Smooth tips
- Versatile tip tapers to 0,3cm
-
Heavy-duty scissors of the highest quality, designed for cutting through tough materials.Features
- 4.5’’ scissors
- Hand-honed in the USA
- Perfect for tough materials
- Powder coated grip
- Enlarged ergonomic finger/thumb hol
-
Out of stock
For when precision is the priority. Designed with tight spots, one loose fiber and perfect ties in mind, these scissors shine when there is little room to work and no margin for error. But the Precision Tip Scissors are too sturdy to be relegated to the #24 Parachute Adams; they’ll hold up just fine as an everyday tool. -
For getting materials just right and ready to use. Spinning and stacking hair like a boss means including just the best hair. Underfur has no business making its way onto your flies, and the Ergo Underfur Comb is the best way to make sure that it stays out of the mix. The fine metal tines stand up to unruly pelts, making it easy to separate the fibers you want from the ones you don’t.Features
- Iconic Loon Yellow powder coated handle
- Ergonomic shape
- Removes underfur
- Works with wide variety of materials
- Stainless steel tines
-
The classic whip finisher with a powder coated ergonomic body. The base of the tool has been sharpened, so that finishing flies and clipping thread can be accomplished with one single tool.Features
- Ergonomic shape
- Powder coated handle
- Sharpened thread clipping base
-
The ultimate dubbing spinner. Developed in partnership with the geniuses at Fly Fish Food, the Gator Grip Dubbing Spinner includes two tips for any spinning scenario a tyer might encounter from complex twists to dubbing loops. The octagonal anti-rolling technology ensures that the tool stays put on the tying desk, while the ring shape allows for smooth consistent tension while palmering.Features
- Gator-grip tip
- Dubbing loop hook
- Octogonal anti-rolling technology
- Ring allows for consistent tension in palmering.
- Powder coated handle
- Works in all spinning scenarios
-
The Mixing Cup is the perfect vessel for modifying head cements and UV Clear Fly Finish, and all but eliminates clean-up. Because cements will not bond to the Mixing Cup, once cured they will pop out.Features
- Mixing vessel for head cements and UV resins
- Unbreakable
- Suctions to smooth surfaces
- Doesnot bond to cements or epoxies or UV resins
- Eliminates clean up - ‘pop’ cured cements out
-
Appropriately named, this is a razor sharp pair of scissors. One of the straight blades is serrated, and the other is non-serrated, aiding in grabbing of materials to eliminate material slip. The knurled tension knob allows for adjustments to specific applications.Features
- 4’’ & 5" scissors
- Hand-honed in the USA
- Knurled tension knob
- Blades: one smooth one serrated
- Powder coated grip
-
This powerful UV light is perfect for curing Loon’s UV resins. A push button on/off and a powerful beam makes quick work of curing UV resin so you can tie more and fish more. One AA battery included.Features
- UV light for curing Loon’s UV resins
- 3 Watt output
- High intensity light for tying and bench applications
- Uses 1 AA battery (included)
-
Out of stock
Powerful enough for professional tyers and rechargeable using a standard USB cable, this is the light without limits. The UV Infiniti Light is the most powerful, most environmentally friendly light we’ve ever offered. A note on the power output: Historically we have used wattsas a unit of measure because of its familiarity with users, and because it was helpful in illustrating the relative strength of our lights. With the introduction of the UV Infiniti Light, we encountered the need to explain the relative power of our lights differently. The UV Infiniti Light was designed as a 10W light. During development of the product a change in components lowered the wattage, but not the actual output of the light. In other words, it became more efficient in the same way that an LED bulb that uses 50 watts is far brighter than an incandescent bulb that uses 50 watts.Features
- UV light for curing Loon’s UV resins
- 1 Watt outpul
- Rechargeable using USB cable (included)
- Uses 1 18659 batter (included)
- On/Off switch indicates power level
-
Out of stock
Small enough to carry in the field, yet powerful enough to use at the bench. The nano light can be stored in a wader or shirt pocket for curing Loon’s UV Knot Sense or UV Wader Repair, but is also an excellent option as an economical light for tyers just getting started with using UV resins. One AAA battery included.Features
- UV light for curing Loon’s UV resins
- Portable and durable
- Powerful enough to cure tying resins
- Uses 1 AAA battery (included)
-
Out of stock
For keeping materials out of the way until you need them. The Vise Pawn is a friend to any tyer that is tired of fighting that piece of hackle or tinsel or ribbing while tying in the next material. The strong magnet is compatible with most vises and is used to pin any material out of the way so that you can continue to build your masterpiece.Features
- Iconic Loon Yellow powder coated handle
- Keeps materials pulled away from tie-in points
- Works with most vises
-
Out of stock
Newest technology SMD ultra high output flashlight. Cures Solarez resin with the correct wavelength. Typically cures Solarez resin in 30 seconds or less. Also has heat-abating "Pulse Power" function. This reduces resin shrinkage and yellowing and increases bond. Comes complete with one rechargeable 18650 Lithium Ion battery and digital battery charger, good for hours of high intensity light and hundreds of re-charges. Charger has polarity indicator warning and READY signal. -
Out of stock
High quality revolving dubbing tool with ball bearing inside. -
Out of stock
High quality revolving dubbing tool with ball bearing inside. -
Out of stock
Very useful tool for fly tying. The soft touch handle exhibits a comfortable hexagonal shape so that the tool won't roll off the tying table. -
Out of stock
A superb stainless steel bobbin holder with a smooth drag system to help control your thread. -
Out of stock
Ceramic tubed bobbin holder in two sizes. -
Useful tool to thread the bobbin holder. The soft touch handle has a special hexagonal shape so that the tool won’t roll off the tying table. -
If you like a smaller bobbin holder then this could be the one for you, great quality and micro ajustable. -
Out of stock
Superb single arm bobbin holder from Stonfo. Made with a larger diameter tube for thinker threads and silks. -
Out of stock
A very smart looking mini hair stacker. Metal with a rubber base. -
Out of stock
A great little tool from Stonfo, combines a comb and Velcro brush. Great for combing out hair or teasing dubbing -
Out of stock
Three vices in one with just a click. The stainless steel shaft is in-line full rotary by dual precision ball bearings. All parts of three vises are included with Transformer. The steady pedestal base has a useful integrated tool rack and connection for magnifying glass item 642 (tools and magnifying glass not included). Other important Transformer features interchangeable jaws, adjustable rotary tension, smooth rotary motion, locking position at any angle, shaft fast locking every 45° angle, adjustable height, reversible for left hand tying. Other accessories included: rounded shape bobbin cradle, parachute plier, adjustable spring material clip, pivot thread cradle, allen keys and instruction manual. -
Out of stock
Drop all your trimmings, offcuts and waste straight into this stylish waste collector. -
Out of stock
One of the best ceramic bobbin holder for saltwater fly tying, super high quality. -
Great quality and easy to use. Comes in two sizes. -
Out of stock
TMC Spinning Hackle Pliers are a combination of the pliers and the handle bar connected by the universal joint. It keeps the hackle perpendicular to the hook shaft when wrapping hackles. It also prevents a hackle from twisting or breaking. It can be used for tying from a midge pattern to a big fly. The pliers have a silicon soft top. -
Out of stock
High quality ceramic bobbin from Temico. -
Out of stock
These small, soft tipped hackle piers have a silicone ring for increased control while wrapping hackles. Aids in precise tension and positioning of all hackle sizes. -
The Tubeworx Tube Fly Tool can turn any vice into a tube fly vice. Wether your tying salmon flies, pike tubes or something else this will help your fly tying. The tool and selection of tube needles will hold your tubes firmly in place allowing you to tie with ease.
